+86-18626315075
RISHBIN WUXI CO., LTD.
product list banner
Services
Contact us

What if the cold roll forming machine runs sideways?

1.When the pressure plate of the cold roll forming machine is deflected, if the board runs to the right, mat the left corner, or down the right bottom.

2.Find good center in the first row and the last row of the cold roll forming machine equipment, and then tighten lock nut, drawing a straight line on both sides in the middle wheel, adjust the clearance between the upper and lower axis, then the machine can be adjusted along the straight line.

3.Before and after the first two lines of the cold roll forming machine equipment from the front of the big four corners at the top of the shaft height consistent, then from the first row to the last row, looking for a line straight, check whether the shaft on a straight line, under the shaft into left and right sides.

Rishbin recommend you some popular roll forming machines:
Top hat roll forming machine
Trapezoidal sheet roll forming machine
Steel frame roll forming machine
Roof tile machine for sale
Downspout forming machine
Steel door frame making machines
Wall panel roll forming machine
U channel roll forming machine
C stud roll forming machine
Corrugated roller machine
Double deck roll forming machine
Standing seam roll forming machine for sale
Batten Machine
Related News
  • Forming Technology of Cold Rolling Square Rectangular Tube and Prospect on New Technology 2

    Forming Technology of Cold Rolling Square Rectangular Tube and Prospect on New Technology 2

    May 8, 20182. Forming process of rectangular tubeRectangular tube can be divided into two types, direct forming process, namely, "square to square" (directly to square) and "round to square" (from circular tube ...view
  • Steel Frame Machine Features

    Steel Frame Machine Features

    January 23, 2018Steel frame machine uses the strip steel as raw material, through the continuous cold roll forming, for the production of complex cross-section profile (products are: light steel frame, paint steel fr...view
  • Cold roll forming machine price factors

    Cold roll forming machine price factors

    January 30, 2018When buying cold roll forming machines, you will take into consideration the question of price, and how does the manufacturer price the product? What factors have a direct impact on the price of equip...view
  • The Development Of Downspout Machine

    The Development Of Downspout Machine

    January 23, 2018Metal downspout machine makes a great improvement over the past years of developing by leaps and bounds, because the metal downspout machine and equipment actually already occupied our whole major fie...view
  • Causes and Countermeasures of Longitudinal Shearing Deformation

    Causes and Countermeasures of Longitudinal Shearing Deformation

    November 28, 2017Snaking (scythe) refers to the bending of the width of a steel coil after a shearing. There are many reasons for this. The general measure is a few millimeter per 2 m.A: the reason caused by raw mater...view
  • Inspection of Cold Roll Forming Machine

    Inspection of Cold Roll Forming Machine

    May 8, 2018It is very important for the cold roll forming machine to have an examination before work. When you want to put the cold roll forming machine into work, you should let it have a comprehensive inspecti...view
  • TEL:+86-18626315075
  • EMAIL:info@rishbin.com
  • ADDRESS:No. 10, Jingshi Rd, Wuxi, China
top