+86-18626315075
RISHBIN WUXI CO., LTD.
product list banner
Services
Contact us

Forming problems

The forming problems in the production of cold roll forming machine

The cold roll forming equipment is a multi-channel shaped roll that is arranged in order, and the rolling material, strip and other metal strip are continuously bent and rolled in order to make the profile of a specific section.

In the production of cold roll forming machine, some problems such as bending, distortion may happen, the main reason is because of unbalanced force, force imbalance left and right, up and down, thus produce distortion. There are three main ways to solve this problem:

1. Design force balance.

2. Accurate processing.

3. Install and adjust the equipment.

Related News
  • PC Endurance Board Bending Processing

    PC Endurance Board Bending Processing

    May 8, 2018The bending of PC sheet and PC board.The impact force of the endurance board can reach 3kg/cm. The impact force of the PC endurance board is 250-300 times as high as that of the ordinary glass, 20-30 ...view
  • How to choose roll forming machine?

    How to choose roll forming machine?

    January 30, 2018How to choose a proper roll forming machine for steel profiles production? Before that, you should know well about the roll forming machine structure.Take cold formed steel as an example, which is wid...view
  • Characteristics and Processing Technology of Cold-formed Steel

    Characteristics and Processing Technology of Cold-formed Steel

    November 28, 2017Cold-formed steel generally uses hot rolled or cold rolled steel as raw materials. In the state of normal temperature, through drawing, stamping, bending or roller bending forming machine, the variou...view
  • 9 Welding Process Methods for Welding Steel Pipe

    9 Welding Process Methods for Welding Steel Pipe

    November 28, 20171. High frequency resistance weldingIt uses the skin effect and proximity effect of high frequency current to rapidly heat the edge of the tube blank and make it reach the melting state. The method of...view
  • The Development Of Downspout Machine

    The Development Of Downspout Machine

    January 23, 2018Metal downspout machine makes a great improvement over the past years of developing by leaps and bounds, because the metal downspout machine and equipment actually already occupied our whole major fie...view
  • What if the cold roll forming machine runs sideways?

    What if the cold roll forming machine runs sideways?

    January 30, 20181.When the pressure plate of the cold roll forming machine is deflected, if the board runs to the right, mat the left corner, or down the right bottom.2.Find good center in the first row and the last ...view
  • TEL:+86-18626315075
  • EMAIL:info@rishbin.com
  • ADDRESS:No. 10, Jingshi Rd, Wuxi, China
top