+86-18626315075
RISHBIN WUXI CO., LTD.
product list banner
News
Contact us

Properties and Advantages of High Frequency Welding Machine

Because welding is generally refered to a a superficial and exterior welding and infiltration process between the two workpieces, in order to achieve the purpose of combining the two. Therefore, the workpiece does not need deep heating and overall heating during the welding process.

The power selection of the high frequency welding machine mainly depends on the material, size, shape and speed requirements of the workpiece. For the workpiece of the same specification, the iron power can be selected to be smaller, the stainless steel is slightly larger, and the copper is larger; For the workpieces of the same material, the required power for the larger size surely is large, the power required for smaller size is small, and so forth.

For the welding of multi-blade milling cutters and drills at the same time, the power should not be too small. Otherwise, not only the welding speed is slow, but also the welding quality is poor. After welding the cutter head of tungsten carbide and other materials, the oven insulation or lime insulation etc. which are of slow cooling method should be adopted. Otherwise, the blade and the cutter head are easy to break and breach. Generally, the high frequency welding machine does not need to set the temperature control circuit if there is no special requirement. First, because the welding temperature is easy to master by human, and the second reason is the high-frequency welding speed is fast. Temperature control is not necessary, and the third reason is there is a certain deviation in temperature sampling.

Many manufacturers originally envisaged to adopt the temperature control methods ultimately found out that there is no need in most of the practical applications. Skilled workers can totally master and control the temperature and quality of each welded piece in the high frequency welding machine.
Related News
  • Introduction of Door Frame Making Machine

    Introduction of Door Frame Making Machine

    August 17, 2018The drive system of the anti-theft door frame making machine mainly consists of pump direct drive and pump-accumulator drive these two type. The anti-theft door frame making machine provides a high-pr...view
  • Drywall Framing

    Drywall Framing

    August 14, 2018Drywall framing is a specialized construction method, and we always use it to put together a wall for putting in drywall, or gypsum board. All framing on which these boards, or sheets, will be mounted...view
  • Grain Silo Manufacturers Dust Explosion-Proof Safety Specification

    Grain Silo Manufacturers Dust Explosion-Proof Safety Specification

    August 17, 2018General Provisions1. During the design stage of grain silos manufacturers, the scope and grade of dust explosion hazard sites shall be defined and divided according to the technical process, material ...view
  • Cold roll forming machine design and installation staff shortage

    Cold roll forming machine design and installation staff shortage

    January 30, 2018Cold roll forming industry shortage of talent has been a state, which is associated with industrial characteristics, the industry belong to the non-standard sector, not a lot of standard can refer to,...view
  • The Development Trend Of Metal Slitting Machine

    The Development Trend Of Metal Slitting Machine

    January 23, 2018China metal slitting machine manufacturers take advantage of international brand sales resources to realize export. To use its international sales network to export complementary mainframe products; m...view
  • Cable Tray Machine

    Cable Tray Machine

    August 14, 2018People usually use the cable tray machine which produced through us for producing cable trays that are used in exclusive sort of factories and buildings. We providing you to reap cable tray machine th...view
  • TEL:+86-18626315075
  • EMAIL:info@rishbin.com
  • ADDRESS:No. 10, Jingshi Rd, Wuxi, China
top